180 Degree End Caps

Description – Used to finish the open end on a stud wall (doorless openings or blind walls). Prevents chips and dings that inevitably occur with square corners.

Main uses – Residential, commercial, hospitality, retail

Sizes – to fit 3 ½”, 3 5/8”, 5 ½”, 7” stud walls

Download Brochure
Diagram of 180 degree corner

180 Degree Corners (1/2" thick)

Inside DiameterOutside Diameter8'10'
3 1/2"4 1/2"$85$111
3 5/8"4 5/8"$85$111
4 1/2"5 1/2"$100$123
6"7"$110$130
7"8"$120$136

180 Degree Corners (5/8" thick)

Inside DiameterOutside Diameter8'10'
3 1/2"4 3/4"$89$116
3 5/8"4 7/8"$89$116
4 1/2"5 3/4"$105$125
6"7 1/4"$115$135
7"8 1/4"$124$160

– End caps have drywall paper on the outer face, unfinished inside face

– As standard corners have a 2 ¼” flat coming off the curve. For maximum corner strength, double up the stud as shown and meet the drywall half way across the second stud. This makes finishing easier by avoiding floating out a butt on a curve.

– It is easier to install curved sections first and then butt the flat drywall up to them.

– If you need to cut to length, the easiest way is on a table saw. You can cut with a knife but unlike drywall, you have to cut all the way through both faces. You can’t cut one face and snap like drywall